ADT® Authorized Dealer Serving Grand Rapids & Surrounding Areas
close up of a lady adjusting the security panel
March 01, 2022

How To Reset Your Home Security System In Grand Rapids

An important advantage of having your home security system installed by trained experts is that you hardly ever find a reason to worry about it. However, there will likely be times when you need to reset your alarms in Grand Rapids. When using a smart command hub, a reset typically takes one or two taps of the touchscreen following a false alarm, power outage, or battery change.

Consult Your Manual Before Resetting Your Alarm

Here’s a simple yet valuable tip before you start resetting your Grand Rapids home security system, check your instruction manual first. You don't want to undermine your property’s defense as a result of touching something incorrectly. Additionally, your system could be different if you switched from a numbered keypad to a digital command hub. If there’s ever a time when you’re struggling to reset your system, don't be reluctant to call your trusted security specialists.

Resetting Your Grand Rapids Home Security System Because Of A False Alarm

Generally, a false alarm happens as a result of the accidental tripping of a sensor. You can engage the control panel or bring up your ADT smartphone app and touch the shield option and enter your credentials to turn off the alarms for these instances. You might be contacted by your 24-hour monitoring specialists, but just tell them you had a false alarm.

Tips To Reset Your Alarm When Experiencing A Power Outage In Grand Rapids

When you lose power due to high winds or other factors, you may start hearing a beeping sound from your alarm’s central interface. This signifies that your security is using the backup battery. To reset the alarm and silence the steady beeps, you should deactivate and reactivate your system.

Keep in mind, if your power outage lasts for prolonged time frame, you might need a full system reset. Heed the directions in the manual -- typically by putting in your unique passcode and tapping the on/off button twice -- and you should be running fine. You could still hear the auxiliary power beeping, as it might not end until the battery charges entirely. Reach out to your home security agent if you continue to have problems with your ADT equipment at least 20 hours after power is restored.

Reset Your Home Security System After Replacing A Battery

There will be infrequent times when you must replace a battery in one of your security devices. In order to accomplish this, you should change your system to "Test Mode" so you avoid triggering an alarm by accident. After the new battery is put in place, remove the alarm panel from "Test Mode" and revert back to your usual settings. If the control panel is unable to notice the device or the battery indicator stays on, you may have to perform a full reset of your security system.

Reset Your Grand Rapids Security System Following The Addition Or Deletion Of A Code

The addition and deletion of users can be completed on your ADT Command interface and the ADT Control mobile app. You shouldn't need a reset of your alarm after adding or removing codes. However, if you find yourself moving to a new home with an existing ADT security system, you need to reach out to your residential security experts at (616) 207-3771 to establish a new contract. The installer will go on site to switch out components, install more devices (if needed), and perform a full reset.

A User-Friendly Security System Is Only A Call Away

Resetting a home security system in Grand Rapids can be a challenge if it isn’t equipped with user-friendly devices and controls. If you would like to acquire your easy-to-use home security system, dial (616) 207-3771 or complete the form below. We’ll be ready to help customize the right security system for your property.